Product Details
- A hardwearing, chemical resistant finish for use in laboratories, chemical factories, breweries, dairies, food factories and bottling plants, hospitals, clinics etc. Widely used on steelwork in chemical plants and marine environments.
- Substrates:Can be applied to suitably prepared metal, timber, plaster and concrete swimming pools.
- The product can be applied by: Brush, roller or airless spray. Brush application is preferred. Roller and Spray also suitable but require to be thinned.
- Spraying requires to be thinned sufficiently to prevent “cobwebbing”.
- Thinner coats give thin films which result in less protection
- Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting
- 6 - 11 m²/l per coat
- Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
- Thinner: Chlorinated Rubber Thinner
- Ready for use by brush. Thin up to 10% for Roller. Thin up to 40% for Spraying. Stir well before use.
- Rapid drying.
- Non-toxic.
- Excellent weather, chemical, abrasion & corrosion resistance.
- Superb flexibility and maintenance properties (it may be overcoated with a minimum of preparation many years after application).
- Can be used at temps. below 10 degrees C. which epoxy paints can’t.
You May Also Like
Similar products you might be interested in
